Select Page

QSK19-D(M)597 Marine Auxiliary Engine

CCEC QSK19-D(M)597 Marine Auxiliary Engine is 6-cylinder inline, 19 liters four-strokes engine with 159 mm (6.25 in) bore and 159 mm (6.25 in) stroke.

QSK19-D(M)597 Marine Auxiliary Engine equipped with Modular Common Rail System (MCRS) Fuel System, comes with turbocharger, this marine diesel engine complies with IMO-NOx requirements of the International Maritime Organization (IMO). The continuous power at 1800RPM of CCEC QSK19-D(M)597 Marine Auxiliary Engine is 800 HP (597 kW). 

Based on standard CCEC marine Auxiliary engines, SeaMac provides both heat exchanger cooling and keel cooling marine Auxiliary engines, we also provide complete propulsion system that including marine engine, gearbox, shaft, propeller as complete power system.

SeaMac provides full life cycle services for all our customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

All of CCEC marine Auxiliary engine are comes with dry type exhaust system, which means dry type exhaust manifold and dry type turbocharger, SeaMac provides upgrading services for water-cooled exhaust system, which modify dry type exhaust system into water-cooled exhaust system, which are quite important and often requested by passenger boat projects.

Advantages of CCEC QSK19-D(M)597 Marine Auxiliary Engine

  • QSK19 series marine engine has stable performance, sufficient combustion, low failure rate, fast starting, good acceleration, strong cooling, high injection pressure, perfect detection characteristics, good transient response, high reliability and durability.

  • It meets the requirements of IMO TIER2 emission regulations, and adopts CMI high-efficiency supercharger and high-efficiency intercooler to make the engine run efficiently, and the application of low-temperature intercooler technology greatly reduces fuel consumption and emissions, while enhancing engine reliability.

  • With high injection pressure, overspeed protection, low-pressure fuel supply, fewer pipelines, and low failure rate, it can ensure full fuel combustion and achieve high-efficiency energy-saving effects. The equipped ESTC electronic oil timing control valve can accurately supplement and adjust the timing and improve the combustion smoke color at low idle speed.

  • Overall modular design, block integration, compact structure, detachable parts, high reusability.

  • Cylinder block and cylinder head adopt integrated design, low failure rate, excellent lubrication system, low parasitic power, durability and excellent reputation.

Technical Specifications

Basic Introduction of CCEC QSK19-D(M)597 Marine Auxiliary Engine

Engine Model:QSK19-D(M)597
Engine Type:6 Cylinders, in Line
Displacement:1150 in³ / 19 L
Rated Power / Speed:597 kW (800 HP) @ 1800 RPM
Aspiration Method:Turbocharged / Aftercooled
Emission Standard:IMO Tier II
Bore * Stroke:159 mm * 159 mm
Packing Size (L * W * H):2007 mm * 963 mm * 1880 mm
Dry Weight:2189 kg
Lead Time:15-30 Working Days
Payment Terms:T / T ,L / C

Engine Model

Advertised Power


Max. Firing Pressure

Fuel System

QSK19 – D(M)433433 kW (580 HP) @ 1500 RPMTurbocharged / Aftercooled14.00 MPaModular Common Rail System (MCRS)
QSK19 – D(M)526526 kW (705 HP) @ 1500 RPMTurbocharged / Aftercooled15.69 MPaModular Common Rail System (MCRS)
QSK19 – D(M)563563 kW (755 HP) @ 1800 RPMTurbocharged / Aftercooled15.25 MPaModular Common Rail System (MCRS)
QSK19 – D(M)597597 kW (800 HP) @ 1800 RPMTurbocharged / Aftercooled15.39 MPaModular Common Rail System (MCRS)

General Infomation of CCEC QSK19-D(M)597 Marine MainAuxiliary Engine

Engine ModelQSK19-D(M)597Fuel pump codeEY39
Curve No.D(M)-597Injector part No.2867147
Displacement1150 in³ / 19 LCPL Code3437
Fuel SystemModular Common Rail System (MCRS)Bore * Stroke159 mm * 159 mm
Advertised Power597 kW (800 HP) @ 1800 RPMCylinders6-cylinder inline
Turbocharger modelHX82MAspirationTurbocharged / Aftercooled
Max. firing pressure (MPa)15.39Overload output (110 %) / Rev. (kW / RPM)657 / 1800
Rated output / Rev. (kW / RPM)597 / 1800Advert. output / Rev. (kW / RPM)N / A

Comming Soon

System Technical Data of CCEC QSK19-D(M)597 Marine Auxiliary Engine

Fuel SystemFuel Consumption at Rated Speed8 GAL/hr / 31 L/hr
Approximate Fuel Flow to Pump25 GAL/hr / 93 L/hr
Maximum Allowable Fuel Supply to Pump Temperature160 °F / 71 °C
Approximate Fuel Flow Return to Tank TemperatureN / A
Maximum Heat Rejection to Drain FuelN / A
Fuel Pressure – Pump Out / Rail Mechanical Gauge56 PSI / 386 kPa
Air SystemIntake Manifold Pressure18 in. Hg / 61 kPa
Intake Air Flow474 CFM / 224 L/sec
Heat Rejection to Ambient797 BTU/min / 14 kW
Exhaust SystemExhaust Gas Flow1082 CFM / 511 L/sec
Exhaust Gas Temperature (Turbine Out)685 °F / 363 °C
Heat Rejection to Exhaust (Manifold)955 °F / 513 °C
Cooling SystemSea Water Pump SpecificationsMAB 0.08.17 – 07 / 16 / 2001
Pressure Cap Rating (With Heat Exchanger Option)7 PSI / 50 kPa
Engines without Low Temperature Aftercooler (LTA) Jacket Water Aftercooled Engine (JWAC)
Coolant Flow to Engine Heat Exchanger55 GAL/min / 208 L/min
Standard Thermostat Operating Range (Start to Open)180 °F / 82 °C
Standard Thermostat Operating Range (Full Open)201 °F / 94 °C
Heat Rejection to Engine Coolant35294 BTU/min / 93 kW

Scopes of Supply of CCEC QSK19-D(M)597 Marine Auxiliary Engine

Exhaust System1. SilencerLubricating System1. Oil Pump
2. Bellows2. Oil Filter
Fuel System1. Fuel PumpStarting System1. Starter Motor
2. Oil Cut Solenoid Valve2. Fywheel Housing
3. Fuel Filter3. Flywheel
Charging System1. AlternatorControl System1.Stadnby Control Panel
Cooling System1. Seawater Pump
2. Heat Exchanger

Optional Accessories of CCEC QSK19-D(M)597 Marine Auxiliary Engine

Exhaust System1. SilencerPower  System1. Battery
Fuel System1. Float Fuel TankCooling System1. Radiator
2. Oil – Water Separator2. Cooling Fan
3. Manual Fouling Pump3. Sea Water Pump
4. Fuel Inlet and Outlet Hose4. Heat Exchanger
Remote Control System1. Sea Water Pump
2. Heat Exchanger

Committed to providing reliable premium propulsion system and power system for all kinds of ships around the world, SeaMac is a sub-brand of EMAC group that focused on maritime application. SeaMac’s ranges of products mainly inclduing marine main engine, marine gearbox, marine propellers, marine control lever system, marine auxiliary engine, marine generator set and emergency generator set.
For more information of our marine proplusion and power system products, you are welcome to visit SeaMac homepage:

Modifiable components of CCEC QSK19-D(M)597 Marine Auxiliary Engine

Air Intake System1. Installation Position of Air FilterStarting System1. 12 V Starter Motor for 12 V Electric System
2. Upgrade to Heavy – Duty Type Air Fitler2. Upgrading to Specified Brand and Speicifications of Starter Motor
Exhuast System1. Can Modify Installation Position and Direction of TurbochargerCharging System1. 12 V Charging Alternator for 12 V Electric System
2. Water – Cooled Exhuast Manifold2. Explosion – Proof Charging Alternator
3. Water – Cooled Turbocharger3. Upgrading to Specified Brand and Speicifications of Charging Alternator
Fuel System1. Upgrade to Fuel Fitler That Integrated With Fuel Transfer Pump and Fuel Pre – HearterEngine Auiliary Accessories1. Additional Auxiliary Systems Can Be Added for Special Applications
Engine Shut-Down System1. 12 V Solenoid for 12 V Electric SystemCooling System1. Can Modify Engine Into Keel Cooling System
2. Explosion – Proof Solenoid2. N / A
Lubricating System1. Oil Pan PositionPower Output System1. Can Modify Size of Flywheel Housing and Flywheel.
2. Number of Dipstick2. Dual – Ear Flywheel Housing (for Twin – Starter System)
3. Position of Dipstick Can Choose From 6 Positions3. Some of Models Can Modify Flywheel Housing Into Pto Integrated Type
4. Can Modify Oil Filter to Be Remote Installation4. Engine Have Connecting Port of Ptos, That Able to Provide Power Output
Engine Mounting System1. Can Modify Engine Mouting Bracket

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate


Sales Team

Marine Service - SeaMacWhatApp-Icon

Automotive Service - DuraMacWhatApp-Icon

Industrial Service - ConeMacWhatApp-Icon

Generator Service - SinoGenWhatApp-Icon

Pump Service - PumpMacWhatApp-Icon

Parts Service - PartMacWhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Sales Director - Mr. Jasper Lee       WhatApp-Icon

Shipping Service

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from

You have Successfully Subscribed!

Pin It on Pinterest