KTA38-G1-B G-Drive Engine
CCEC KTA38-G1-B (1800 RPM) Generator Drive Engine is V Type 12-Cylinder, 38 liters (2300 in3) Four-Strokes Engine with 159 mm (6.25 in) Bore and 159 mm (6.25 in) Stroke.
KTA38-G1-B Generator Drive Engine Equipped with CMI PT Fuel System, Comes with Turbocharged and Aftercooled.The Standby Power for 60 Hz Generator Set (1800 RPM) of CCEC KTA38-G1-B Generator Drive Engine is 1135 HP (847 kW). The Prime Power for 60 Hz Generator Set (1800 RPM) of CCEC KTA38-G1-B Generator Drive Engine is 1030 HP (769 kW).The Continuous Power for 60 Hz Generator Set (1800 RPM) of CCEC KTA38-G1-B Generator Drive Engine is 900 HP (672 kW).
As Part of EMAC, SinoGen Also Provide Complete Power Supply Solutions that Powered by CCEC, Our Ranges of Products Including Open Type Generator Set, Silence Type Generator Set, Super Silence Type Generator Set, Mobile Trailer, Complete Power Truck and Complete Power Car for Railways Applications.
We Provide Full Life Cycle Services for All Customers, From Design to Power System Supply, from Installation to Commissioning, from After-Sales Service Training to Spare Parts Supply, From Trouble Shooting to Overhaul Technical Support.
Advantages of CCEC KTA38-G1-B G-Drive Engine
-
High quality alloy cast iron for the rigidity performance and lower vibration and noise. Wet and replaceable cylinder liners for better heat rejection performance and easier replacement.
-
4 valves per cylinder, Optimize the mixed level which lead to an excellent fuel consumption rate and emission performance. High quality alloy cast iron, one cylinder one head, single camshaft and special designed outine for better reliability and durability.
-
CMS unique PT with fixture and Step Timing control for precise fuel injection make the fuel injection pressure above 120 Mpa, which leads to an excellent fuel consumption rate and emission performance. Check valve in fuel tube improve reliability.
-
Gear water pump and great flux channel design provide effective cooling. Spin-in water filter makes the coolant clean and keeps it in normal acidity.
-
Advanced Holset turbocharger and after-cooled technology, pulse exhaust manifold reduce exhaust temperature, provide excellence fuel consumption and emission performance.
Technical Specifications
Basic Introduction of CCEC KTA38-G1-B G-Drive Engine
| Engine Model: | KTA38-G1-B (-B means 1800 RPM engine) |
| Engine Type: | 4 – Cycle; 60° Vee; 12 – Cylinder Diesel |
| Displacement: | 38 L |
| Rated Power / Speed: | 769 kW @ 1800 RPM |
| Aspiration Method: | Turbocharged & Aftercooled Intercooler |
| Emission Standard: | Euro II |
| Bore * Stroke: | 159 mm * 159 mm |
| Packing Size (L * W * H): | 2341 mm * 1360 mm * 1653 mm |
| Dry Weight: | 4366 kg |
| Lead Time: | 15-30 Working Days |
| Payment Terms: | T / T ,L / C |
Engine Model |
Aspiration |
Prime Power |
Performance Curve |
Compression Ratio |
Fuel System |
| KT38-GA | Turbocharged | 867 HP (647 kW) @ 1500 RPM | FR – 6923 | 14.5 : 1 | CMI PT |
| KT38-G-A | Turbocharged & Aftercooled Intercooler | 750 HP (560 kW) @ 1500 RPM | C – 3642 | 15.5 : 1 | CMI PT |
| KT38-G-B | Turbocharged & Aftercooled Intercooler | 910 HP (679 kW) @ 1800 RPM | C – 3642 | 15.5 : 1 | CMI PT |
| KTA38-G1-A | Turbocharged & Aftercooled Intercooler | 850 HP (634 kW) @ 1500 RPM | FR – 6080 | 14.5 : 1 | CMI PT |
| KTA38-G1-B | Turbocharged & Aftercooled Intercooler | 1030 HP (769 kW) @ 1800 RPM | FR – 6080 | 14.5 : 1 | CMI PT |
| KTA38-G1B-A | Turbocharged & Aftercooled Intercooler | 850 HP (634 kW) @ 1500 RPM | FR | 15.5 : 1 | CMI PT |
| KTA38-G1B-B | Turbocharged & Aftercooled Intercooler | 1135 HP (847 kW) @ 1800 RPM | FR | 15.5 : 1 | CMI PT |
| KTA38-G1E | Turbocharged & Aftercooled Intercooler | 811 HP (605 kW) @ 1500 RPM | FR | 14.7 : 1 | CMI PT |
| KTA38-G2-A | Turbocharged & Aftercooled Intercooler | 890 HP (664 kW) @ 1500 RPM | FR – 6081 | 14.5 : 1 | CMI PT |
| KTA38-G2-B | Turbocharged & Aftercooled Intercooler | 1085 HP (809 kW) @ 1800 RPM | FR – 6081 | 14.5 : 1 | CMI PT |
| KTA38-G2A-A | Turbocharged & Aftercooled Intercooler | 1200 HP (895 kW) @ 1500 RPM | C – 621 – D | 14.5 : 1 | CMI PT |
| KTA38-G2A-B | Turbocharged & Aftercooled Intercooler | 1350 HP (1007 kW) @ 1800 RPM | C – 621 – D | 14.5 : 1 | CMI PT |
| KTA38-G2B-A | Turbocharged & Aftercooled Intercooler | 953 HP (711 kW) @ 1500 RPM | FR – 6924 | 14.5 : 1 | CMI PT |
| KTA38-G2B-B | Turbocharged & Aftercooled Intercooler | 1112 HP (830 kW) @ 1800 RPM | FR – 6924 | 14.5 : 1 | CMI PT |
| KTA38-G2E | Turbocharged & Aftercooled Intercooler | 959 HP (715 kW) @ 1500 RPM | FR | 14.7 : 1 | CMI PT |
| KTA38-G4 | Turbocharged & Aftercooled Intercooler | 1350 HP (1007 kW) @ 1800 RPM | FR – 6138 | 13.9 : 1 | CMI PT |
| KTA38-G5 | Turbocharged & Aftercooled Intercooler | 1180 HP (881 kW) @ 1500 RPM | FR – 6140 | 13.9 : 1 | CMI PT |
| KTA38-G5E | Turbocharged & Aftercooled Intercooler | 1106 HP (825 kW) @ 1500 RPM | FR | 14.7 : 1 | CMI PT |
| KTA38-G7E | Turbocharged & Aftercooled Intercooler | 1254 HP (935 kW) @ 1500 RPM | FR | 14.7 : 1 | CMI PT |
| KTA38-G9-A | Turbocharged & Aftercooled Intercooler | 1602 HP (1195 kW) @ 1500 RPM | FR – 6454 | 14.5 : 1 | CMI PT |
| KTA38-G9-B | Turbocharged & Aftercooled Intercooler | 1635 HP (1220 kW) @ 1800 RPM | FR – 6454 | 14.5 : 1 | CMI PT |
| KTAA38-G9A | Turbocharged & Air – Air Intercooler | 1602 HP (1195 kW) @ 1500 RPM | CQ – 6090 | 13.0 : 1 | CMI PT |
| KTA38-G9E | Turbocharged & Aftercooled Intercooler | 1328 HP (990 kW) @ 1500 RPM | FR | 14.7 : 1 | CMI PT |
| ——END—— | |||||
General Information of CCEC KTA38-G1-B Generator Engine |
|||
| Engine Model | KTA38-G1-B | Configuration | D233019DX02 |
| Performance Curve | FR – 6080 | CPL No. | 0851 |
| Type | 4 – Cycle; 60° Vee; 12 – Cylinder Diesel | Aspiration | Turbocharged & Aftercooled Intercooler |
| Bore * Stroke | 159 mm * 159 mm / 6.25 in * 6.25 in | Displacement | 2300 in3 / 38 L |
| Compression Ratio | 14.5 : 1 | Fuel System | CMA PT |
| Stand_By Power | 1135 HP (847 kW) @ 1800 RPM | Prime Power | 1030 HP (769 kW) @ 1800 RPM |
Installation Data of CCEC KTA38-G1-B Generator Drive Engine |
|||
| Wet Weight – Fan to Flywheel Engine | 8700 lb / 3946 kg | ||
| Wet Weight – Heat Exchanger Cooled Engine | 11030 lb / 5003 kg | ||
| Moment of Inertia of Rotating Components – with FW 6001 Flywheel | 248 lbm.ft2 / 10.45 kg.m2 | ||
| C.G. Distance From Front Face of Block | 31.5 in / 801 mm | ||
| Maximum Static Loading at Rear Main Bearing | 2000 lb / 907 kg | ||
| Firing Order | 1- 6 – 5 – 2 – 3 – 4 – 6 – 1 – 2 – 5 – 4 – 3 | ||
| Moment of Inertia of Rotating Components (Excluding Flywheel) | 94 lbm.ft2 / 3.96 kg.m2 | ||
| Dry Weight – Fan to Flywheel Engine | 8200 lb / 3719 kg | ||
| Dry Weight – Heat Exchanger Cooled Engine | 9625 lb / 4366 kg | ||
| Maximum Bending Moment at Rear Face of Block | N / A | ||
| Moment of Inertia of Rotating Components – with FW 6011 Flywheel | 493 lbm.ft2 / 20.78 kg.m2 | ||
| Center of Gravity Above Crankshaft Centerline | 11.0 in / 279 mm | ||
| Steady State Stability Band at any Constant Load | N / A | ||
| ——END—— | |||
Performance Data of CCEC KTA38-G1-B Generator Engine |
|||||||||
| Stanby Power | Prime Power | Stanby Power | Prime Power | ||||||
| Engine Speed | 1800 RPM | 1800 RPM | Engine Idle Speed | 725 – 775 RPM | 725 – 775 RPM | ||||
| Gross Engine Power Output | 1135 HP | 847 kW | 1030 HP | 769 kW | Brake Mean Effective Pressure | 216 PSI | 1488 kPa | 196 PSI | 1351 kPa |
| Piston Speed | 1870 ft/min | 9.5 m/s | 1870 ft/min | 9.5 m/s | Friction Horsepower | 170 HP | 127 kW | 170 HP | 127 kW |
| Intake Air Flow | 2750 cfm | 1298 L/s | 2550 cfm | 1204 L/s | Exhaust Gas Temperature | 915 °F | 491 °C | 895 °F | 479 °C |
| Exhaust Gas Flow | 7285 cfm | 3439 L/s | 6655 cfm | 3141 L/s | Radiated Heat to Ambient | 7330 HP | 129 min/kW | 6690 HP | 0 min/kW |
| Heat Rejection to Coolant | 29510 HP | 519 min/kW | 26780 HP | 471 min/kW | Engine Water Flow @ 3psi | 390 U.S.GPM | 24.6 L/s | 390 U.S.GPM | 24.6 L/s |
System Technical Data of CCEC KTA38-G1-B Generator Engine |
||
| Exhaust System | Maximum Allowable Back Pressure (1800 RPM) | 3 in Hg / 10.2 kPa |
| Maximum Allowable Back Pressure | 3 in Hg / 10 kPa | |
| Exhaust Pipe Size Normally Acceptable | 6 in / 152 mm | |
| Air Induction System | Maximum Allowable Intake Air Restriction With Heavy Duty Air Cleaner – Clean Element | 15 in H2O / 3.73 kPa |
| Intake Air Alarm Temperature (1800 RPM) | 82 °F / 180 °C | |
| Cooling System | Coolant Capacity – With Heat Exchanger Hx 4073 ( With Out Explantion Tank) | 18 US Gal / 66 L |
| Coolant Capacity – With Explantion Tank & Lta | 30 US Gal / 112 L | |
| Maximum Coolant Friction Heat External To Engine @1500 RPM | 7 PSI / 48.3 kPa | |
| Maximum Coolant Friction Heat External To Engine @1500 RPM | 10 PSI / 68.9 kPa | |
| Maximum Allowable Air Friction Across Radator | N / A | |
| Minimum Raw Water Flow @ 90 °F(32 ℃) To Heat Exchanger With Hx 4073 | 54 GPM / 204.4 L/min | |
| Maximum Raw Water Inlet Pressure @ Heat Exchanger HX 4073 | 50 PSI / 344.7 kPa | |
| Maximum Raw Water Inlet Pressure @ Heat Exchanger HX 6076 | 50 PSI / 344.7 kPa | |
| Maximum Allowable Top Tank Temperature (Stand_by/Prime) | 220/212 °F / 104/100 °C | |
| Standard Thermostat (Modulating) Range | 180 – 200 °F / 82 – 93 °C | |
| Maximum Allowable Coolant Temperature | 205 °F / 96.1 °C | |
| Minimum Coolant Makeup Capacity | 6.3 US Gal / 23.8 L | |
| Maximum Raw Water Inlet Friction | 10 PSI / 254.0 kPa | |
| Minimum Allowable Fill Rate | 5 GPM / 18.9 L/min | |
| Maximum Allowable Initial Fill Time | 5 min | |
| Minimum Allowable Coolant Expansion Space | 5 % | |
| Maximum Allowable Inlet Coolant Temperature At Limited Situation (Stand_By / Prime) | 160/150 °F / 71/66 °C | |
| Lubrication System | Oil Pressure @ Idle Speed | 20 PSI / 138 kPa |
| Oil Pressure @ Rated Speed | 45 – 65 PSI / 310 – 448 kPa | |
| Oil Flow at Rated Speed | 124 GPM / 469.4 L/min | |
| Maximum Allowable Oil Temperature | 250 °F / 121 °C | |
| By – Pass Filter Capacity – Spin – on Cartridge Type | 2 X 0.7 US Gal / 2 X 2.6 L | |
| By – Pass Filter Capacity – Replaceable Element Type | 2 X 2.9 US Gal / 2 X 11.0 L | |
| Oil Pan Capacity (Option OP6023) – High | 40.0 US Gal / 151.4 liter | |
| Total System Capacity (Excluding By – Pass Filter) | 45.0 US Gal / 170.3 L | |
| Total System Capacity (Excluding By – Pass Filter) | 35.7 US Gal / 135.1 L | |
| Angularty of Standard Oil Pan Oil Pan – Front Down | 30 ° | |
| Fuel System | Fuel Injection System | Cummins PT |
| Maximum allowable Restriction to PT Fuel Pump – With Clean Fuel Filter | 4 in Hg / 13.55 kPa | |
| Maximum allowable Restriction to PT Fuel Pump – With Dirty Fuel Filter | 10 in Hg / 33.86 kPa | |
| Maximum Allowable Injector Return Line Restriction – With Check Valves | 7 in Hg / 22 kPa | |
| Maximum Allowable Injector Return Line Restriction – Less Check Valves | 3 in Hg / 8 kPa | |
| Minimum Allowable Fuel Tank Vent Capability | 15 ft3/h / 425 L/h | |
| Starter (Heavy, Anode) | 24 V | |
| Battary Recharge System, Negative ground | 35 A | |
| Maximum Allowable Resistance of Starting Circuit | 0.002 Ω | |
| Minimum Recommended Battary Capacity – Cold Soak at 50 °F(10 ℃) or Above | 1200 0°F CCA | |
| Minimum Recommended Battary Capacity – Cold Soak at 32 ~ 50 °F(0 ~ 10 ℃) or Above | 1280 0°F CCA | |
| Minimum Recommended Battary Capacity – Cold Soak at 0 ~ 32 °F(- 18 ~ 0 ℃) or Above | 1800 0°F CCA | |
| ——END—— | ||
Scopes of Supply of CCEC KTA38-G1-B Generator Drive Engine |
|||
| Air Intake System | 1. Air Intake Manifold | Exhuast System | 1. Exhuast Manifold |
| 2. Standard Air Filter | 2. Turbocharger | ||
| 3. Water-Air Intercooler | 3. Exhuast Elbow | ||
| Starting System | 1. Starter Motor | Charging System | 1. Charging Alternator |
| 2. Starter Rely | 2. N/A | ||
| Lubricating System | 1. Oil Pump | Cooling System | 1. Water Pump |
| 2. Oil Filter | 2. Engine Fan | ||
| 3. N/A | 3. Standard Radiator | ||
| Engine Shut-Down System | 1. Engine Fuel Shut-Off Solenoid | Power Output System | 1. Flywheel |
| 2. N/A | 2. Standard Flywheel Housing | ||
| Fuel System | 1. Fuel Transfer Pump | ||
| 2. High-Pressure Fuel Pump | |||
| 3. Fuel Filter | |||
| ——END—— | |||
Optional Accessories of CCEC KTA38-G1-B Generator Drive Engine |
|||
| Air Intake System | 1. Air Intake Pre-Heater | Exhuast System | 1. Muffler & Bellows |
| 2. Air Intake Shut-Off Valve | 2. Spark Arrestor Type Muffler & Bellows | ||
| 3. Heavy-Duty Air Filter | 3. DPF System | ||
| 4. Plateau Type Air Filter | 4. N/A | ||
| Fuel System | 1. Coarse Filter | Lubricating System | 1. Oil Pre-Heater |
| 2. Fuel Pre-Heater | 2. N/A | ||
| Starting System | 1. Manual Magnetic DC Contactor | Cooling System | 1. Silent Type Radiator |
| 2. Dual Ears Flywheel Housing | 2. Plateau Radiator | ||
| 3. Spring Starter Motor | 3. Salt-Spray Resistant Radiator | ||
| 4. Air Starter Motor | 4. Coolant Pre-Heater | ||
| 5. Hydraulic Starter Motor | 5. Jacket Water Heater | ||
| 6. Manual Magnetic DC Contactor | 6. N/A | ||
| ——END—— | |||
As part of EMAC, SinoGen focusing on generator set related business, from Generator drive engine power pack to complete generator set, from generator control panel to synchronizing cabinet, from super silent type generator set to mobile power trailer, SinoGen provides professional one-stop solution for everything customer needed for generator set.
For more information of our complete generator set products, you are welcome to visit SinoGen homepage: www.sino-gen.com
Modifiable components of CCEC KTA38-G1-B Generator Drive Engine |
|||
| Air Intake System | 1. Installation Position of Air Filter | Charging System | 1. 12 V Charging Alternator for 12 V Electric System |
| 2. Upgrade to Heavy-Duty Type Air Fitler | 2. Explosion-Proof Charging Alternator | ||
| Exhuast System | 1. Position of Turbocharger | Lubricating System | 1. Oil Pan Position |
| 2. Water-Cooled Exhuast Manifold | 2. Number of Dipstick | ||
| 3. Water-Cooled Turbocharger | 3. Position of Dipstick | ||
| Fuel System | 1. Upgrade to Fuel Fitler that Integrated with Fuel Transfer Pump | Starting System | 1. 12 V Starter Motor for 12 V Electric System |
| Engine Shut-Down System | 1. 12 V Solenoid for 12 V Electric System | Power Output System | 1. Size of Flywheel Housing and Flywheel. |
| 2. Explosion-Proof Solenoid | 2. Dual-Ear Flywheel Housing (For Twin-Starter System) | ||
| ——END—— | |||
Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
