Select Page

QSX15 Industrial 

CCEC QSX15 series Industrial Engine have excellent performance characteristics. It has a 17:1 compression ratio, displaces 915 cubic inches (15.0 liters), and offers a wide rpm range, including a maximum low idle speed of 1,200 rpm and a minimum low idle speed of 600 rpm. In addition, the engine adopts HPI Electronic fuel system, combined with turbocharging and charge air cooling system, to ensure efficient combustion and excellent performance. Its main power range is 114 horsepower to 530 horsepower (85 kilowatts to 395 kilowatts), and the torque range is 1356 N.m to 2096 N.m.

In order to give users a better experience, CCEC QSX15 series industrial engines are equipped with an excellent crankshaft system (cold start capability) and an excellent cooling system to ensure that the engine can start reliably and efficiently under different environmental conditions, thus improving reliability, Efficiency and environmental friendliness. In addition, the excellent lubrication system also provides the machine with better cooling, reduced friction, extended life and improved efficiency.

As part of EMAC, ConeMac provides industrial power pack solution that integrated with air intake, air exhaust, cooling system, control system, transmission and hydraulic accessories, We also supplying special products such as explosion proof engine, generator and water pump set, as well as ultra-low temperature condition engine power pack.

Advantages of QSX15 Industrial Engine

·Surging Power
Using the world’s leading high-pressure common rail fuel system (MCRS) and full electronic control module, ultra-high fuel injection pressure, eddy current and harmonic integrated air passages, and configuration of Cuminster’s unique high-pressure ratio high-efficiency supercharger, the engine is dynamic and instantaneous. Responsiveness is maximized.
·Emissions Compliance
Fully meet the requirements of GB20891-2007 Chinese national standard for different stages of emission levels, and meet the third stage and off-road emissions (Tier3) requirements in Europe and North America.

QSX15 Euro Stage II Industrial Engine

All models of CCEC QSK19 Euro Stage II Industrial Engine

QSX15-C375 Industrial Engine ( Imported )

QSX15-C375 Industrial Engine ( Imported )

Rated Power: 375 HP @ 1800 RPM
Max. Torque: N/A
Fuel System: HPI Electronic
Aspiration: Turbocharged CAC
Emission Standard: CARB Tier 3, EU Stage IIIA, US EPA Tier 3

QSX15-C525 Industrial Engine ( Imported )

QSX15-C525 Industrial Engine ( Imported )

Rated Power: 525 HP @ 2100 RPM
Max. Torque: N/A
Fuel System: HPI Electronic
Aspiration: Turbocharged CAC
Emission Standard: U.S. EPA Tier 2, CARB Tier 2, EU Stage II

QSX15-C530 Industrial Engine ( Imported )

QSX15-C530 Industrial Engine ( Imported )

Rated Power: 530 HP @ 1800 RPM
Max. Torque: N/A
Fuel System: HPI Electronic
Aspiration: Turbocharged CAC
Emission Standard: U.S. EPA Tier 2, CARB Tier 2, EU Stage II

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.ccec-engine.com

You have Successfully Subscribed!

Pin It on Pinterest