QSK78-C3500 Industrial Engine ( Imported )
CCEC QSK78-C3500 Industrial Engine have excellent performance characteristics. It has a compression ratio of 15.5 : 1, a displacement of 4,735 cubic inches (77.6 liters) .
CCEC QSK78-C3500 Industrial Engine offers a wide rev range, including a maximum low idle speed of 1,400 rpm and a minimum low idle speed of 750 rpm. In addition, the engine adopts HPI Electronic fuel system, with 2-Stg Turbo. Aftercooled and Intercooled system, ensuring efficient combustion and excellent performance.
As part of EMAC, ConeMac provides industrial power pack solution that integrated with air intake, air exhaust, cooling system, control system, transmission and hydraulic accessories, We also supplying special products such as explosion proof engine, generator and water pump set, as well as ultra-low temperature condition engine power pack.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.
Advantages of CCEC QSK78-C3500 Industrial Engine
Advanced design and sophisticated manufacturing to adapt to various harsh working conditions! High-strength parts, strong ability to work under heavy loads.
Cylinder block and cylinder head adopt integrated design. The occurrence of engine water leakage and oil leakage is prevented, and the parts are about 40 % less than other similar engines. The failure rate is greatly reduced.
Using forged steel camshaft and crankshaft, high-strength cylinder block design, multiple parts cast on the cylinder block, high rigidity, high pressure resistance, good reliability, and longer service life.
The cylinder bore adopts a platform mesh honing design. The perfect geometric structure effectively prevents oil leakage, and the use of advanced technology such as new piston ring components and gasket crimping and molding reduces oil loss.
The five key systems of the electronically controlled engine are all developed by CCEC, and have been applied and verified in different fields around the world to ensure the excellent economy and reliability of the product.
By optimizing the control strategy and combining with the actual operating conditions of the equipment, the fuel economy can be further improved.
Technical Specifications
Basic Introduction of CCEC QSK78-C3500 Industrial Engine
| Engine Model: | QSK78-C3500 |
| Engine Type: | 4 Cycle , In-line , 6 Cylinder |
| Displacement: | 77.6 L |
| Rated Speed: | 1900 RPM |
| Rated Power / Speed: | 3500 HP @ 1900 RPM |
| Aspiration Method: | 2-Stg Turbo. Aftercooled and Intercooled |
| Emission Standard: | U.S. EPA Tier 2 |
| Bore * Stroke: | 170 mm × 190 mm |
| Packing Size (L * W * H): | 5691 mm * 2305 mm * 2798 mm |
| Weight , Net Dry: | 18964 kg |
| Lead Time: | 15-30 Working Days |
| Payment Terms: | T/T ,L/C |
| Engine Model | Rated Power | Displacement | Aspiration | Compression Ratio | Fuel System |
| QSK78-C3500 | 3500 HP @ 1900 RPM | 4735 in3 (77.6 L) | 2-Stg Turbo. Aftercooled and Intercooled | 15.5 : 1 | HPI Electronic |
| —END— | |||||
| General Information of CCEC QSK78-C3500 Industrial Engine | |||
| Engine Model | QSK78-C3500 | CPL Code | 3270 |
| Curve & Datasheet | FR6704 | Rated Power | 3500 HP (2610 kW) @ 1900 RPM |
| Compression Ratio | 15.5 : 1 | Emission Certification | U.S. EPA Tier 2 |
| Noise Emissions Top | 102.9 dBa | Peak Torque | 13771 N.m/1500 r/min |
| Noise Emissions Right Side | 104.6 dBa | Displacement | 4735 in3 (77.6 L) |
| Noise Emissions Left Side | 104.6 dBa | Fuel System | HPI Electronic |
| Noise Emissions Front | 104.2 dBa | Maximum low idle speed | 1400 r/min |
| Aspiration | 2-Stg Turbo. Aftercooled and Intercooled | Minimum low idle speed | 750 r/min |
| Configuration | D773001CX03 | Revision | 10-May-2010 |
| —END— | |||
| Torque Output | Power Output | Fuel Consumption | ||||||
| RPM | lb-ft | N-m | RPM | HP | kW | RPM | lb/hp-hr | g/kW-hr |
| 700 RPM | 3500 lb-ft | 4745 N-m | 700 RPM | 466 HP | 347 kW | 1500 RPM | 0.341 lb/hp-hr | 207.423 g/kW-hr |
| 800 RPM | 4000 lb-ft | 5423 N-m | 800 RPM | 609 HP | 454 kW | 1600 RPM | 0.337 lb/hp-hr | 204.99 g/kW-hr |
| 1000 RPM | 4758 lb-ft | 6451 N-m | 1000 RPM | 906 HP | 676 kW | 1700 RPM | 0.337 lb/hp-hr | 204.99 g/kW-hr |
| 1200 RPM | 5741 lb-ft | 7784 N-m | 1200 RPM | 1312 HP | 978 kW | 1800 RPM | 0.341 lb/hp-hr | 207.423 g/kW-hr |
| 1400 RPM | 9463 lb-ft | 12830 N-m | 1400 RPM | 2523 HP | 1881 kW | 1900 RPM | 0.346 lb/hp-hr | 210.464 g/kW-hr |
| 1500 RPM | 10157 lb-ft | 13771 N-m | 1500 RPM | 2901 HP | 2163 kW | |||
| 1600 RPM | 10059 lb-ft | 13638 N-m | 1600 RPM | 3064 HP | 2285 kW | |||
| 1700 RPM | 9932 lb-ft | 13466 N-m | 1700 RPM | 3215 HP | 2397 kW | |||
| 1800 RPM | 9799 lb-ft | 13286 N-m | 1800 RPM | 3358 HP | 2504 kW | |||
| 1900 RPM | 9675 lb-ft | 13118 N-m | 1900 RPM | 3500 HP | 2610 kW | |||
| —END— | ||||||||
| Engine Performance Data CCEC QSK78-C3500 Industrial Engine | ||||
| Rated Power | Torque Peak | |||
| Engine Speed | 1900 RPM | N/A | 1500 RPM | N/A |
| Output Power | 3500 HP | 2610 kW | 2901 HP | 2163 kW |
| Torque | 9675 lb-ft | 13118 N-m | 10157 lb-ft | 13771 N-m |
| Friction Horsepower | 341 HP | 254 kW | N/A | N/A |
| Intake Manifold Pressure | 88 in-Hg | 297 kPa | 73 in-Hg | 247 kPa |
| Turbo Comp. Outlet Pressure | 90 in-Hg | 304 kPa | 74 in-Hg | 250 kPa |
| Turbo Comp. Outlet Temperature | 308 deg F | 153 deg C | 278 deg F | 137 deg C |
| Inlet Air Flow | 8800 ft3/min | 4153 L/s | 6300 ft3/min | 2973 L/s |
| Exhaust Gas Flow | 20200 ft3/min | 9533 L/s | 16050 ft3/min | 7575 L/s |
| Exhaust Gas Temperature | 805 deg F | 429 deg C | 921 deg F | 494 deg C |
| Maximum Fuel Flow to Pump | 4367 lb/hr | 1981 kg/hr | 2981 lb/hr | 1352 kg/hr |
| Heat Rejection to Coolant | 52000 BTU/min | 914 kW | N/A | N/A |
| Aftercooler Coolant Heat Rejection | 40500 BTU/min | 712 kW | N/A | N/A |
| Heat Rejection to Fuel | 2435 BTU/min | 43 kW | 93493 BTU/min | 1644 kW |
| Heat Rejection to Ambient | 11000 BTU/min | 193 kW | N/A | N/A |
| Heat Rejection to Exhaust | 117000 BTU/min | 2057 kW | N/A | N/A |
| —END— | ||||
| System Technical Data of CCEC QSK78-C3500 Industrial Engine | |||
| Intake Air System | Maximum allowable air temperature rise over ambient at Intake Manifold (Naturally Aspirated Engines) or Turbo Compressor inlet (Turbo-charged Engines): (This parameter impacts emissions, LAT and/or altitude capability) | 20 delta deg F | 11.1 delta deg C |
| Low Temperature Aftercooling System | Coolant temperature from the Aftercooler outlet @ Maximum engine coolant out temperature at Limiting Ambient Temperature (1P-2L) | N/A deg F | N/A deg C |
| Coolant temperature from the Aftercooler outlet @ 25C (77F) ambient | 137 deg F | 58 deg C | |
| Maximum coolant temperature into the Aftercooler @ 25C (77F) ambient | 117 deg F | 47 deg C | |
| Maximum coolant temperature into Aftercooler @ Limiting Ambient conditions | 153 deg F | 67 deg C | |
| Maximum coolant temperature for engine protection controls | 215 deg F | 102 deg C | |
| Maximum coolant operating temperature at engine outlet (max. top tank temp): | 212 deg F | 100 deg C | |
| Exhaust Syetem | Maximum exhaust back pressure: | 2 in-Hg | 7 kPa |
| Recommended exhaust piping size (inner diameter): | 12 in | 305 mm | |
| Lubrication System | Nominal operating oil pressure minimum low idle | 30 psi | 207 kPa |
| Nominal operating oil pressure maximum rated speed | 72 psi | 496 kPa | |
| Minimum engine oil pressure for engine protection devices minimum low idle | 21.9 psi | 151 kPa | |
| Fuel System | Fuel cooling requirements (with diesel fuel) | ||
| Maximum heat rejection to return fuel at max. coolant and inlet fuel temperature: | 2635 BTU/min | 46 kW | |
| Fuel return flow rate of: | 4601 lb/hr | 2087 kg/hr | |
| Fuel return temperature prior to cooler: | 225 deg F | 107 deg C | |
| Maximum supply fuel flow: | 5878 lb/hr | 2666 kg/hr | |
| Maximum return fuel flow: | 4601 lb/hr | 2087 kg/hr | |
| Engine fuel compatibility (consult Service Bulletin #3379001 for appropriate use of other fuels) | DF1, DF2, B5, B20 | ||
| Maximum fuel inlet pressure: | 3 psi | 21 Kpa | |
| Cranking System (Cold Starting Capability) | Unaided Cold Start Minimum cranking speed | 132 RPM | |
| Unaided Cold Start Minimum ambient temperature for unaided cold start | 10 deg F | -12.2 deg C | |
| Aided Cold Start Minimum ambient temperature with Ether only | -25 deg F | -32 deg C | |
| Aided Cold Start Minimum ambient temperature with coolant and lube heater only | -25 deg F | -32 deg C | |
| Cold starting aids available | Ether, Block Heater, Oil Pan Heater | ||
| Maximum parasitic load at 10 deg F @ | |||
| —END— | |||
Scopes of Supply of CCEC QSK78-C3500 Industrial Engine | ||||
| Fuel System | 1. Fuel Transfer Pump | Exhaust System | 1. Exhuast Manifold | |
| 2. High-Pressure Fuel Pump | 2. Turbocharger | |||
| 3. Fuel Filter | 3. Exhuast Elbow | |||
| Air Intake System | 1. Air Intake Manifold | Starting System | 1. Starter Motor | |
| 2. N/A | 2. Starter Relay | |||
| Cooling System | 1. Water Pump | Power Output System | 1. Flywheel | |
| 2. Engine Fan | 2. Standard Flywheel Housing | |||
| 3. Standard Radiator | 3. N/A | |||
| Lubricating System | 1. Oil Pump | Charging System | 1. Charging Alternator | |
| 2. Oil Filter | 2. N/A | |||
| Engine Shut-Down System | 1. Engine Fuel Shut-Off Solenoid | Engine Mounting System | 1. Engine Mounting Bracket | |
| Engine Auiliary Accessories | 1. Air Compressor | |||
| ——END—— | ||||
Optional Accessories of CCEC QSK78-C3500 Industrial Engine | ||||
| Air Intake System | 1. Air Intake Pre-Heater | Exhuast System | 1. Muffler & Bellows | |
| 2. Air Intake Shut-Off Valve | 2. Flame Trap | |||
| 3. Air Filter | 3. Spark Arrestor Type Muffler & Bellows | |||
| 4. Air Intake Pre-Filter | 4. Dpf System | |||
| 5. Air Filter Alarm System | 5. N/A | |||
| Fuel System | 1. Coarse Filter | Lubricating System | 1. Oil Pre-Heater. | |
| 2. Fuel Pre-Heater | 2. N/A | |||
| Starting System | 1. Manual Magnetic Dc Contactor | Cooling System | 1. Silent Type Radiator | |
| 2. Dual Ears Flywheel Housing | 2. Plateau Radiator | |||
| 3. Spring Starter Motor | 3. Salt-Spray Resistant Radiator | |||
| 4. Air Starter Motor | 4. Coolant Pre-Heater | |||
| 5. Hydraulic Starter Motor | 5. Jacket Water Heater | |||
| 6. Manual Magnetic Dc Contactor | 6. N/A | |||
| Engine Auiliary Accessories | 1. Hydraulic Oil Pump | Control System | 1. Can Add Engine Monitoring System, Contro System With Wiring Harness. | |
| 2. Air Conditioner Compressor | 2. Can Add Self-Protection System that Integrated with Alarm System. | |||
| Power Output System | 1. Clutch | Engine Mounting System | 1. Shock Absorber Pad | |
| ——END—— | ||||
Committed to Providing Stable and Reliable Premiem Power System for Global Construction Machinery Manufacturer Partners, ConeMac is A Sub-Brand of the EMAC Group that Focuses on Construction Equipment Application.
ConeMac’s Ranges of Products Mainly Inclduing Marine Construction Engines Power Pack, Construction Equipment Gearbox, Gear Reducer, Explosion-Proof Engines, Generator Set and Water Pump Set for Mining, Oil and Gas Field.
For More Information of Our Industrial Power System Products, You Are Welcome to Visit ConeMac Homepage: Conemac.cn
Modifiable Components of CCEC QSK78-C3500 Industrial Engine | ||||
| Air Intake System | 1. Installation Position of Air Filter | Charging System | 1. 12 V Charging Alternator for 12 v Electric System | |
| 2. Upgrade to Heavy-Duty Type Air Fitler | 2. Explosion-Proof Charging Alternator | |||
| 3. N/A | 3. Upgrading to Specified Brand and Speicifications of Charging Alternator | |||
| Exhuast System | 1. Water-Cooled Exhuast Manifold | Lubricating System | 1. Oil Pan Position | |
| 2. Water-Cooled Turbocharger | 2. Number of Dipstick | |||
| 3. Can Modify Installation Position and Direction of Turbocharger | 3. Position of Dipstick Can Choose from 6 Positions | |||
| 4. N/A | 4. Can Modify Oil Filter to be Remote Installation | |||
| Engine Shut-Down System | 1. 12 V Solenoid for 12 V Electric System | Starting System | 1. Upgrading to Specified Brand and Speicifications of Starter Motor | |
| 2. Explosion-Proof Solenoid | 2. 12 V Starter Motor for 12 V Electric System | |||
| Fuel System | 1. Upgrade to Fuel Fitler that Integrated with Fuel Transfer Pump and Fuel Pre-Hearter | Engine Auiliary Accessories | 1. All of auxiliary System can Choose Specified Brands and Specifications | |
| 2. N/A | 2. Additional Auxiliary Systems Can be Added for Special Applications | |||
| Cooling System | 1. Can Modify Engine fan Into Blower Fan or Suction Fan | Power Output System | 1. Can Modify Size of Flywheel Housing and Flywheel | |
| 2. Can Modify Central Position of Engine Cooling Fan | 2. Dual-Ear Flywheel Housing (For Twin-Starter System) | |||
| 3. Can Choose Type of Engine Fan From Mechanical Type or Electric Type | 3. Some of Models can Modify Flywheel Housing Into PTO Integrated Type | |||
| 4. N/A | 4. Engine Have Connecting Port of PTOs, That Able to Provide Power Output | |||
| Engine Mounting System | 1. Can Modify Engine Mouting Bracket | |||
| ——END—— | ||||
Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
![](/wp-content/uploads/2021/08/WhatApp-Icon.png"){kind=icon}
