Select Page

CCEC KTA19-M500 Marine Engine

CCEC KTA19-M500 (1800 RPM) Marine Main Engine is a 6-cylinder inline, 14 liters four-strokes engine with 140 mm (5.50 in) bore and 152 mm (6.00 in) stroke. 

KTA19-M500 Marine Main Engine equipped with PT Fuel System, comes with turbocharger and Water-Air intercooler, this marine diesel engine complies with IMO-NOx requirements of the International Maritime Organization (IMO). The continuous power at 1800 RPM of CCEC KTA19-M500 Marine Main Engine is 500 HP (373 kW). The maximum torque of the engine at 1500 RPM is 2077 N.m.

Based on standard CCEC marine main engines, SeaMac provides both heat exchanger cooling and keel cooling marine main engines, we also provide complete propulsion system that including marine engine, gearbox, shaft, propeller as complete power system.

SeaMac provides full life cycle services for all our customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

All of CCEC marine main engine are comes with dry type exhaust system, which means dry type exhaust manifold and dry type turbocharger, SeaMac provides upgrading services for water-cooled exhaust system, which modify dry type exhaust system into water-cooled exhaust system, which are quite important and often requested by passenger boat projects.

Advantages of KTA19-M500 Marine Engine

  • The cylinder block and cylinder head adopt integrated design, which prevents the occurrence of water leakage and oil leakage, and greatly reduces the failure rate. The application of strengthened cylinder liners and chrome-plated piston rings improves the durability of the engine and prolongs the life of the engine. 

  • It meets the requirements of China Inland River 1, China Inland River 2, and IMO TIER2 stage emission regulations, and adopts CMI’ BHT3B supercharger optimized for marine engines. emissions while enhancing engine reliability. 

  • With high injection pressure, overspeed protection, low-pressure fuel supply, fewer pipelines, and low failure rate, it can ensure full fuel combustion and achieve high-efficiency energy-saving effects. The equipped ESTC electronic oil timing control valve can accurately supplement and adjust the timing and improve the combustion smoke color at low idle speed. 

  • The design of the exhaust system of Chongqing CMI marine engine is reasonable, and the water-cooled supercharger and water-cooled exhaust pipe can better reduce the surface temperature of the engine and meet the requirements of SOLAS safety regulations.

Technical Specifications

Basic Introduction of CCEC KTA19 – M500 Marine Main Engine

Engine Model:KTA19 – M500
Engine Type:6 Cylinders, in Line
Displacement:14 L
Rated Power / Speed:500 HP @ 1800 RPM
Aspiration Method:Turbocharged & Water – Air Intercooler
Emission Standard:Euro II
Bore * Stroke:140 mm * 152 mm
Packing Size (L * W * H):1573 mm * 796 mm * 1343 mm
Dry Weight:1725 kg
Lead Time:15-30 Working Days
Payment Terms:T / T , L / C

Coming Soon

Engine Model

Advertised Power


Compression Ratio

Fuel System

K19 – M500373 kW (500 HP) @ 1800 RPMTurbocharged & Water – Air Intercooler14.5 : 1PT
K19 – M550410 kW (550 HP) @ 2100 RPMTurbocharged & Water – Air Intercooler14.5 : 1PT
K19 – M600447 kW (600 HP) @ 1800 RPMTurbocharged & Water – Air Intercooler14.5 : 1PT
K19 – M640477 kW (640 HP) @ 1800 RPMTurbocharged & Water – Air Intercooler14.5 : 1PT
KT19 – M425317 kW (425 HP) @ 1800 RPMTurbocharged15.5 : 1PT
KTA19 – M470351 kW (470 HP) @ 1800 RPMTurbocharged & Water – Air Intercooler15.5 : 1PT
KTA19 – M500373 kW (500 HP) @ 1800 RPMTurbocharged & Water – Air Intercooler15.5 : 1PT
KTA19 – M550410 kW (550 HP) @ 2100 RPMTurbocharged & Water – Air Intercooler15.5 : 1PT
KTA19 – M3 – 500373 kW (500 HP) @ 1800 RPMTurbocharged & Water – Air Intercooler13.8 : 1PT
KTA19 – M3 – 600447 kW (600 HP) @ 1800 RPMTurbocharged & Water – Air Intercooler13.8 : 1PT
KTA19 – M3 – 640477 kW (640 HP) @ 1800 RPMTurbocharged & Water – Air Intercooler13.8 : 1PT
KTA19 – M4 – 700522 kW (700 HP) @ 2100 RPMTurbocharged & Water – Air Intercooler13.8 : 1PT
General Infomation of CCEC  KTA19 – M500 Marine Main Engine
Engine ModelKTA19 – M500ConfigurationD193064MX02
Curve No.M – 446CPL Code0969
Displacement855 in3 / 14 LBore * Stroke140 mm * 152 mm / 5.50 in * 6.00 in
Fuel SystemPTCylinders6, in Line
Advertised Power373 kW (500 HP) @ 1800 RPMAspirationTurbocharged & Water – Air Intercooler
Rating TypeContinuousPeak Engine Torque @ 1500 RPM1532 lb.ft / 2077 N.m
Brake Mean Effective Pressure190 PSI / 1309 kPaMinimum Idle Speed Setting675 – 775 RPM
Normal Idle Speed Variation ± 50 RPMHigh Idle Speed Range Minimum1962 RPM
High Idle Speed Range Maximum2106 RPMCompression Ratio15.5 : 1
Piston Speed1870 ft/min / 9.5 m/secWeight (Dry) – Engine Only – Average3800 lb. / 1725 kg
Weight (Dry) – Engine With Heat Exchanger System – Average4198 lb. / 1906 kgInstallation Diagram No4914417

Performance Curve CCEC Cummins KTA19-M500 Marine Main Engine

System Technical Data of CCEC  KTA19 – M500 Marine Main Engine
Fuel SystemFuel Consumption at Rated Speed24 GAL/hr / 90 L/hr
Approximate Fuel Flow to Pump71 GAL/hr / 270 L/hr
Maximum Allowable Fuel Supply to Pump Temperature160 °F / 71 °C
Approximate Fuel Flow Return to Tank TemperatureN / A
Maximum Heat Rejection to Drain FuelN / A
Fuel Pressure – Pump Out / Rail Mechanical Gauge187 PSI / 1288 kPa
Air SystemIntake Manifold Pressure36 in. Hg / 122 kPa
Intake Air Flow1101 CFM / 520 L/sec
Heat Rejection to Ambient2618 BTU/min / 46 kW
Exhaust SystemExhaust Gas Flow2753 CFM / 1300 L/sec
Exhaust Gas Temperature (Turbine Out)891 °F / 477 °C
Heat Rejection to Exhaust (Manifold)1161 °F / 627 °C
Cooling SystemSea Water Pump SpecificationsMAB 0.08.17 – 07 / 16 / 2001
Pressure Cap Rating (With Heat Exchanger Option)7 PSI / 50 kPa
Engines without Low Temperature Aftercooler (LTA)
Jacket Water Aftercooled Engine (JWAC)
Coolant Flow to Engine Heat Exchanger120 GAL/min / 454 L/min
Standard Thermostat Operating Range (Start to Open)180 °F / 82 °C
Standard Thermostat Operating Range (Full Open)203 °F / 95 °C
Heat Rejection to Engine Coolant317247 BTU/min / 303 kW

Scopes of Supply of CCEC KTA19 – M500 Marine Main Engine

Exhaust System1. SilencerLubricating System1. Oil Pump
2. Bellows2. Oil Filter
Fuel System1. Fuel PumpStarting System1. Starter Motor
2. Oil Cut Solenoid Valve2. Fywheel Housing
3. Fuel Filter3. Flywheel
Charging System1. AlternatorControl System1.Stadnby Control Panel
Cooling System1. Seawater Pump
2. Heat Exchanger

Optional Accessories of CCEC KTA19 – M500 Marine Main Engine

Exhaust System1. SilencerPower  System1. Battery
Fuel System1. Float Fuel TankCooling System1. Radiator
2. Oil – Water Separator2. Cooling Fan
3. Manual Fouling Pump3. Sea Water Pump
4. Fuel Inlet and Outlet Hose4. Heat Exchanger
Remote Control System1. Sea Water Pump
2. Heat Exchanger

Committed to providing reliable premium propulsion system and power system for all kinds of ships around the world, SeaMac is a sub-brand of EMAC group that focused on maritime application. SeaMac’s ranges of products mainly inclduing marine main engine, marine gearbox, marine propellers, marine control lever system, marine auxiliary engine, marine generator set and emergency generator set.
For more information of our marine proplusion and power system products, you are welcome to visit SeaMac homepage:

Modifiable components of CCEC KTA19 – M500 Marine Main Engine

Air Intake System1. Installation Position of Air FilterStarting System1. 12 V Starter Motor for 12 V Electric System
2. Upgrade to Heavy – Duty Type Air Fitler2. Upgrading to Specified Brand and Speicifications of Starter Motor
Exhuast System1. Can Modify Installation Position and Direction of TurbochargerCharging System1. 12 V Charging Alternator for 12 V Electric System
2. Water – Cooled Exhuast Manifold2. Explosion – Proof Charging Alternator
3. Water – Cooled Turbocharger3. Upgrading to Specified Brand and Speicifications of Charging Alternator
Fuel System1. Upgrade to Fuel Fitler That Integrated With Fuel Transfer Pump and Fuel Pre – HearterEngine Auiliary Accessories1. Additional Auxiliary Systems Can Be Added for Special Applications
Engine Shut-Down System1. 12 V Solenoid for 12 V Electric SystemCooling System1. Can Modify Engine Into Keel Cooling System
2. Explosion – Proof Solenoid2. N / A
Lubricating System1. Oil Pan PositionPower Output System1. Can Modify Size of Flywheel Housing and Flywheel.
2. Number of Dipstick2. Dual – Ear Flywheel Housing (for Twin – Starter System)
3. Position of Dipstick Can Choose From 6 Positions3. Some of Models Can Modify Flywheel Housing Into Pto Integrated Type
4. Can Modify Oil Filter to Be Remote Installation4. Engine Have Connecting Port of Ptos, That Able to Provide Power Output
Engine Mounting System1. Can Modify Engine Mouting Bracket

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.


Sales Team

Marine Service - SeaMacWhatApp-Icon

Automotive Service - DuraMacWhatApp-Icon

Industrial Service - ConeMacWhatApp-Icon

Generator Service - SinoGenWhatApp-Icon

Pump Service - PumpMacWhatApp-Icon

Parts Service - PartMacWhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Sales Director - Mr. Jasper Lee       WhatApp-Icon

Shipping Service

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from

You have Successfully Subscribed!

Pin It on Pinterest