Select Page

QSK19-G14 G-Drive Engine

CCEC QSK19-G14 (1500 RPM) Generator Drive Engine is 6-Cylinder In-line, 19 liters (1159 in3) Four-Strokes Engine with 159 mm (6.25 in) Bore and 159 mm (6.25 in) Stroke.

QSK19-G14 Generator Drive Engine Equipped with CMI MCRS Fuel System, Comes with Turbocharged and Charge Air Cooled.The Standby Power for 50 Hz Generator Set (1500 RPM) of CCEC QSK19-G14 Generator Drive Engine is 599 HP (447 kW). The Prime Power for 50 Hz Generator Set (1500 RPM) of CCEC QSK19-G14 Generator Drive Engine is 539 HP (402 kW).The Continuous Power for 50 Hz Generator Set (1500 RPM) of CCEC QSK19-G14 Generator Drive Engine is 486 HP (362 kW).

As Part of EMAC, SinoGen Also Provide Complete Power Supply Solutions that Powered by CCEC, Our Ranges of Products Including Open Type Generator Set, Silence Type Generator Set, Super Silence Type Generator Set, Mobile Trailer, Complete Power Truck and Complete Power Car for Railways Applications.

We Provide Full Life Cycle Services for All Customers, From Design to Power System Supply, from Installation to Commissioning, from After-Sales Service Training to Spare Parts Supply, From Trouble Shooting to Overhaul Technical Support.

Advantages of CCEC QSK19-G14 G-Drive Engine

  • High quality alloy cast iron for the rigidity performance and lower vibration and noise. Wet and replaceable cylinder liners for better heat rejection performance and easier replacement.

  • 4 valves per cylinder, Optimize the mixed level which lead to an excellent fuel consumption rate and emission performance. High quality alloy cast iron, one cylinder one head, single camshaft and special designed outine for better reliability and durability.

  • CMS unique PT with fixture and Step Timing control for precise fuel injection make the fuel injection pressure above 120 Mpa, which leads to an excellent fuel consumption rate and emission performance. Check valve in fuel tube improve reliability.

  • Gear water pump and great flux channel design provide effective cooling. Spin-in water filter makes the coolant clean and keeps it in normal acidity.

  • Advanced Holset turbocharger and after-cooled technology, pulse exhaust manifold reduce exhaust temperature, provide excellence fuel consumption and emission performance.

Technical Specifications

 Basic Introduction of CCEC QSK19-G14 G-Drive Engine

Engine Model:QSK19-G14
Engine Type:4 – Cycle; 60° Vee; 6 – Cylinder Diesel
Displacement:18.9 L
Rated Power / Speed:402 kW @ 1500 RPM
Aspiration Method:TC & Charge Air Cooled
Emission Standard:EPA Tier 2
Bore * Stroke:159 mm * 159 mm
Packing Size (L * W * H):1695 mm * 985 mm * 1723 mm
Dry Weight:1972 kg
Lead Time:15-30 Working Days
Payment Terms:T / T ,L / C

Coming Soon

coming soon

Engine Model

Prime Power

Aspiration

Configuration

Performance Curve

Compression Ratio

QSK19-G3-A770 HP (574 kW) at 1500 RPMTurbocharged & Air – Air AftercooledD193103GX03FR-444615.0 : 1
QSK19-G3-B815 HP (608 kW) at 1800 RPMTurbocharged & Air – Air AftercooledD193103GX03FR-444615.0 : 1
QSK19-G4-A770 HP (574 kW) at 1500 RPMTurbocharged & Charge Air CooledD193103GX03FR-458015.0 : 1
QSK19-G4-B750 HP (559 kW) at 1800 RPMTurbocharged & Charge Air CooledD193103GX03FR-458015.0 : 1
QSK19-G5815 HP (608 kW) at 1800 RPMTurbocharged & Charge Air CooledD193103GX03FR-458115.0 : 1
QSK19-G11813 HP (606 kW) at 1500 RPMTurbocharged & Charge Air CoolerD193103GX03FR-476915.0 : 1
QSK19-G11X894 HP (667 kW) at 1500 RPMTurbocharged & Air – Air AftercooledD193103GX03FR-476915.0 : 1
QSK19-G12675 HP (503 kW) at 1500 RPMTC & Low Temperature AftercooledD193103GX03FR-477315.0 : 1
QSK19-G13605 HP (451 kW) at 1500 RPMTurbocharged & Charge Air CooledD193103GX03FR-477315.8 : 1
QSK19-G14539 HP (402 kW) at 1500 RPMTurbocharged & Charge Air CooledD193103GX03FR479115.8 : 1
QSKTAA19-G3-NR2-A770 HP (574 kW) at 1500 RPMTurbocharged & Air – Air AftercooledD193103GX03FR-444615.0 : 1
QSKTAA19-G3-NR2-B815 HP (608 kW) at 1800 RPMTurbocharged & Air – Air AftercooledD193103GX03FR-444615.0 : 1
——END——

General Infomation of CCEC QSK19-G14 Generator Engine

Engine ModelQSK19-G14ConfigurationD193103GX03
Performance CurveFR4791CPL4382
TypeFour Cycle ; Inline ; 6 CylinderAspirationTurbocharged and Charge Air Cooled
Stroke * Bore159 mm * 159 mm / 6.25 in * 6.25 inDisplacement1150 in3 / 18.9 L
Compression Ratio15.8 : 1Fuel SystemCMS MCRS
Standby Power & Engine Speed599 HP (447 kW) at 1500 RPMAftertreatment0
Date2-Aug-19Emission ComplianceNoncertified EPA Tier 3
Prime Power & Engine Speed539 HP (402 kW) at 1500 RPMContinuous Power & Engine Speed486 HP (362 kW) at 1500 RPM

Installation Data of CCEC QSK19-G14 Generator Engine

Wet Weight(Approximate)4568 lb / 2072 kg
Moment of Inertia of Rotating Components – with FW 4016 Flywheel, SAE 0195.0 lbm.ft2 / 8.2 kg.m2
Center of Gravity from Rear Face of Block24.0 in / 609.6 mm
Dry Weight (Approximate)4348 lb / 1972 kg
Maximum Bending Moment at Rear Face of Block1000 lb.ft / 1356 N.m
Center of Gravity Above Crankshaft Centerline11.0 in / 279.4 mm
——END——

Performance Data of CCEC QSK19-G14 Generator Engine

STANDBYPRIMECONTINUOUS
Frequency50 Hz50 Hz50 Hz
Governed Engine Speed1500 RPM1500 RPM1500 RPM
Gross Engine Power Output599 HP / 447 kW539 HP / 402 kW486 HP / 362 kW
Brake Mean Effective Pressure274 psi / 1890 kPa247 psi / 1704 kPa222 psi / 1531 kPa
Friction PowerN/AN/AN/A
Intake Air Flow1363 ft3/min / 644 L/s1279 ft3/min / 604 L/s1214 ft3/min / 573 L/s
Exhaust Gas Temp890 °F / 477 °C900 °F / 483 °C890 °F / 477 °C
Exhaust Gas Flow3426 ft3/min / 1617 L/s3215 ft3/min / 1518 L/s3044 ft3/min / 1437 L/s
Air : Fuel Ratio29.3 : 129.7 : 130.9 : 1
Radiated Heat to Ambient2483 BTU/min / 44 kW2280 BTU/min / 41 kW2088 BTU/min / 37 kW
Heat to JW Radiator9112 BTU/min / 161 kW6575 BTU/min / 116 kW5851 BTU/min / 103 kW
Heat to Exhaust22398 BTU/min / 394 kW21003 BTU/min / 370 kW19670 BTU/min / 346 kW
Heat to FuelN/A0 / 00 / 0
Heat to Aftercooler Radiator5972 BTU/min / 106 kW5129 BTU/min / 91 kW4547 BTU/min / 80 kW
Charge Air Flow100 lb/min / 46 kg/min93 lb/min / 43 kg/min88 lb/min / 40 kg/min
Turbo Comp Outlet Pressure31.9 psi / 220 kPa29 psi / 200 kPa26 psi / 180 kPa
Turbo Comp Outlet Temp363 °F / 184 °C346 °F / 175 °C328 °F / 165 °C

Performance Curve CCEC QSK19-G3A G-Drive Engine

System Technical Data of CCEC QSK19-G14 Generator Engine

Exhaust SystemMax Allowable Static Bending Moment @ Exhaust Outlet FlangeN/A
Max Back Pressure at Standby Power (Exhaust Outlet)0 in Hg / 0 kPa
Air Induction SystemMax Air Temperature Rise Over Ambient At Compressor Inlet0 °F / -18 °C
Max Intake Air Restriction – With Normal Duty Air Cleaner and Clean Filter Element10.0 in H2O / 2.5 kPa
Max Intake Air Restriction – With Heavy Duty Air Cleaner and Clean Filter Element0 in H2O / 0 kPa
Max Intake Air Restriction – With Dirty Filter Element25.0 in H2O / 6.2 kPa
Cooling SystemJacket Water/ High Temperature Circuit Requirements
Max Coolant Friction Head External to Engine (1500 RPM)5.0 psi / 34.5 kPa
Engine Water Flow at Stated Friction Head External to Engine: 1 psi Friction Head (1500 RPM)128 US gpm / 485 L/m
Engine Water Flow at Stated Friction Head External to Engine: Maximum Friction Head (1500 RPM)118 US gpm / 447 L/m
Coolant Capacity – Engine High Temperature Circuit11.0 US gal / 41.6 L
Minimum Pressure Cap Rating at Sea Level7.0 psi / 48.3 kPa
Max Static Head of Coolant Above Crankshaft Centerline60.0 ft / 18.3 m
Max Coolant (Top Tank) Temperature for Standby/Prime Power219/212 °F / 104/100 °C
Thermostat (Modulating) Range0-0 °F / -18 – 18 °C
Low Temperature Circuit (LTC) Requirements
Max Coolant Friction Head External to Engine (1500 RPM)N/A
Aftercooler Water Flow at Stated Friction Head External to Engine: psi Friction Head (1500 RPM)N/A
Aftercooler Water Flow at Stated Friction Head External to Engine: Maximum Friction Head (1500 RPM)N/A
Max Coolant Temp into LTC @ 77 °F (25 °C) Ambient0 °F / -18 °C
Max Coolant Temperature into LTC @ Limiting Ambient Conditions for Standby/Prime Power0 °F / -18/ -18 °C
Thermostat (Modulating) Range0 °F / -18 °C
Coolant Capacity – Engine Low Temperature Circuit0 US gal / N/A L
Charge Air Cooler Requirements
Max Allowable Pressure Drop Across Charge Air Cooler and OEM CAC piping (1800 RPM)3.0 in Hg / 10.1 kPa
Max Charge Air Cooler Outlet to Ambient at 77 °F (25 °C) (CAC dT)38 °F / 21 °C
Max CAC Outlet Temperature at <=25 °C (77 °F) Ambient115 °F / 64 °C
Lubrication SystemOil Pressure at Minimum Idle Speed20 psi / 138 kPa
Oil Pressure at Governed SpeedN/A-70 psi / N/A-483 kPa
Max Oil Temperature250 °F / 121 °C
Oil Capacity : Low – High16-19 US gal / 61-72 L
Total System Capacity (with Spin-On Filters)22 US gal / 83 L
Fuel SystemMax Allowable Fuel Supply Restriction at Stage 1 Filter Inlet5.0 in Hg / 16.9 kPa
Max Allowable Head on Injector Return Line – (Consisting of Friction Head and Static Head)10.0 in Hg / 33.8 kPa
Max Fuel Inlet Temperature160 °F / 71 °C
Max Supply Fuel Flow0 US gph / N/A L/hr
Max Return Fuel Flow65 US gph / 246 L/hr
Electrical SystemSystem Voltage24 volts
Minimum Recommended Battery Capacity – Cold Soak @ 0 °F (-18 °C)900 CCA
Max Starting Circuit Resistance0.002 ohm
Max Current Draw of the System amps0 amps
COLD START CAPABILITYUnaided Cold Start – Minimum Cranking Speed150 RPM
Unaided Cold Start – Minimum Ambient Temp for Unaided Cold Start10 °F / -12 °C
Performance DataMinimum Low Idle Speed700 RPM
Maximum Low Idle Speed0 RPM
——END——

 

Scopes of Supply of CCEC QSK19-G14 Generator Drive Engine

Air Intake System1. Air Intake ManifoldExhuast System1. Exhuast Manifold
2. Standard Air Filter2. Turbocharger
3. Water-Air Intercooler3. Exhuast Elbow
Starting System1. Starter MotorCharging System1. Charging Alternator
2. Starter Rely2. N/A
Lubricating System1. Oil PumpCooling System1. Water Pump
2. Oil Filter2. Engine Fan
3. N/A3. Standard Radiator
Engine Shut-Down System1. Engine Fuel Shut-Off SolenoidPower Output System1. Flywheel
2. N/A2. Standard Flywheel Housing
Fuel System1. Fuel Transfer Pump
2. High-Pressure Fuel Pump
3. Fuel Filter
——END——

Optional Accessories of CCEC QSK19-G14 Generator Drive Engine

Air Intake System1. Air Intake Pre-HeaterExhuast System1. Muffler & Bellows
2. Air Intake Shut-Off Valve2. Spark Arrestor Type Muffler & Bellows
3. Heavy-Duty Air Filter3. DPF System
4. Plateau Type Air Filter4. N/A
Fuel System1. Coarse FilterLubricating System1. Oil Pre-Heater
2. Fuel Pre-Heater2. N/A
Starting System1. Manual Magnetic DC ContactorCooling System1. Silent Type Radiator
2. Dual Ears Flywheel Housing2. Plateau Radiator
3. Spring Starter Motor3. Salt-Spray Resistant Radiator
4. Air Starter Motor4. Coolant Pre-Heater
5. Hydraulic Starter Motor5. Jacket Water Heater
6. Manual Magnetic DC Contactor6. N/A
——END——

As part of EMAC, SinoGen focusing on generator set related business, from Generator drive engine power pack to complete generator set, from generator control panel to synchronizing cabinet, from super silent type generator set to mobile power trailer, SinoGen provides professional one-stop solution for everything customer needed for generator set.
For more information of our complete generator set products, you are welcome to visit SinoGen homepage: www.sino-gen.com

Modifiable components of CCEC QSK19-G14 Generator Drive Engine

Air Intake System1. Installation Position of Air FilterCharging System1. 12 V Charging Alternator for 12 V Electric System
2. Upgrade to Heavy-Duty Type Air Fitler2. Explosion-Proof Charging Alternator
Exhuast System1. Position of TurbochargerLubricating System1. Oil Pan Position
2. Water-Cooled Exhuast Manifold2. Number of Dipstick
3. Water-Cooled Turbocharger3. Position of Dipstick
Fuel System1. Upgrade to Fuel Fitler that Integrated with Fuel Transfer PumpStarting System1. 12 V Starter Motor for 12 V Electric System
Engine Shut-Down System1. 12 V Solenoid for 12 V Electric SystemPower Output System1. Size of Flywheel Housing and Flywheel.
2. Explosion-Proof Solenoid2. Dual-Ear Flywheel Housing (For Twin-Starter System)
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate

WhatsApp-Online-logo

Sales Team


Marine Service - SeaMacWhatApp-Icon

Automotive Service - DuraMacWhatApp-Icon

Industrial Service - ConeMacWhatApp-Icon

Generator Service - SinoGenWhatApp-Icon

Pump Service - PumpMacWhatApp-Icon

Parts Service - PartMacWhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Sales Director - Mr. Jasper Lee       WhatApp-Icon


Shipping Service

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.ccec-engine.com

You have Successfully Subscribed!

Pin It on Pinterest